Vlan; Port Isolation - WAGO 852-1322 Manual

Industrial managed switch 8 ports 1000base-t; mac security

Hide thumbs Also See for 852-1322:

Table of Contents

852-1322

Parameter

Port Security Global Setting

Global State

Port Security Settings

Port Range

Port State

Maximum MAC

10.6.5 VLAN

Port Isolation is a port-based virtual LAN function. It partitions the switching ports into vir-

tual private domains designated on a per port basis. Data switching outside of the

switch's private domain is not allowed. VLAN tag information of the packets is ignored.

This function can be used to configure one or more egress ports that allow the data re-

ceived by the specific port to forward it.

If you want to allow communications between two subscriber ports, you must define the

egress port for both ports. By default, it forms a VLAN with all ETHERNET ports.

Product manual | Version: 1.2.0

Industrial Managed Switch

Table 36: WBM "Security" tab – "Port Security Settings" tab

Description

Select Global State to enable port security on the switch. Deselect Global State to dis-

able port security on the switch.

Select the range of ports for which you want to enable/disable port security.

Enable or disable port security on the selected range of ports.

Select the maximum number of MAC addresses for the selected range of ports

Configuration in the WBM

Table of Contents

Table of Contents