When Message R/F Is Received - NTT docomo STYLE Series Instruction Manual

Receive Message R/F

When Message R/F is received

Subscribe to sites which provide Message Service to
automatically receive information (messages). Message
Service uses Message R (Request) and Message F (Free).
Save up to 50 messages each in the FOMA terminal. Capacity
varies depending on the size of message.
The following icon appears when Message R/F has been received.
Meaning of icons
A/B
Unread Message R/F
(green)
A/B
Received Message R/F is full in the FOMA terminal
(yellow)
G/I
Message R/F is at i-mode center
S/T
Message R/F is full at i-mode center
Unread Message R/F and Message R/F are at
z/8
i-mode center
Unread Message R/F and Message R/F at i-mode
</9
center is full
Received Message R/F in the FOMA terminal is full
>/0
and Message R/F is at i-mode center
Received Message R/F in the FOMA terminal is full
7/!
and Message R/F at i-mode center is full
When Message R/F at i-mode center is full, existing messages may
be overwritten.
For details on retrieving Message R/F from the i-mode center
nP. 132
If memory is full, oldest read unprotected Message R/F is
overwritten automatically. Protect Message R/F to prevent
overwriting.
146
Opening new Message R/F
When Message R/F is received, the newest one appears
automatically. The received Message R/F does not appear when Auto
message display is set to [No auto display].
1
Receive Message R/F automatically (A/B flashes).
2
After reception, the receive complete screen appears
and the message ring tone sounds (A/B appears).
: The message appears for approximately 15 seconds and the
stand-by display reappears automatically.
: If the screen returns to stand-by, the stock icon L (New
Message R)/Q (New Message F) appears.
Not displaying messages automatically
: In the receive complete screen, select [MessageR]/
[MessageF]/select a message/t.
Automatically displaying Message R/F
<Auto message display>
Set priority and message types.
Msg R preferred When Message R and Message F are received
simultaneously, Message R appears automatically
Msg F preferred When Message R and Message F are received
simultaneously, Message F appears automatically
MessagesR only Only Message R appears automatically
MessagesF only Only Message F appears automatically
No auto display No messages appear automatically
1
In stand-by, press m/[Mail setting]/[Auto
message display].
2
Select the display method/t.