Overview Of Parameters And Function Diagrams - Siemens SINAMICS S120 Installation And Start-Up Manual

SINAMICS Safety Integrated (Booksize)

Overview of parameters and function diagrams

5.5 Overview of parameters and function diagrams
Parameter overview (see List Manual)
Table 5-3 Safety Integrated parameters
No.
Control
Unit
(CU)
p9601 Enable safety functions
p9602 Enable safe brake control
p9620 Signal source for safe standstill
p9650 Safety Integrated tolerance time SGE changeover
p9658 Transition period STOP F to STOP A
p9659 Timer for forced checking procedure
p9761 Password input
p9762 New password
p9763 Confirm password
r9770[0...2] Version
r9771 Shared functions
r9772 Status
r9773 Status (Control Unit + Motor Module)
r9774 Status (group safe standstill)
r9780 Monitoring clock cycle
r9794 Cross monitoring list
r9795 Diagnostics for STOP F
r9798 Safety Integrated actual checksum SI parameters
p9799 Safety Integrated specified checksum SI
parameters
5-170
Name
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
No. Can be changed
Motor in
Module
(MM)
p9801
p9802
Safety Integrated
-
commissioning commissioning
p9850
(p0010 = 95) (p0010 = 95)
p9858
-
- In every operating
mode
-
Safety Integrated
commissioning commissioning
-
(p0010 = 95)
r9870[0...2] -
r9871 -
r9872 -
- -
- -
r9880 -
r9894 -
r9895 -
r9898 -
p9899 Safety Integrated
commissioning
(p0010 = 95)
E Siemens AG, 2004. All rights reserved