Supplementary Services; Figure 5-8: Supplementary Services Parameters Screen - AudioCodes MediaPack MP-108 User Manual

MediaPack SIP User's Manual
5.5.2.2

Supplementary Services

Use this screen to configure parameters that are associated with supplementary services. For
detailed information on the supplementary services, refer to Section
To configure the supplementary services' parameters, take these 4
steps:
Open the 'Supplementary Services' screen (Protocol Management menu > Advanced
1.
Parameters submenu > Supplementary Services option); the 'Supplementary Services'
screen is displayed.
Configure the supplementary services parameters according to
2.
Click the Submit button to save your changes, or click the Subscribe for MWI or Un-
3.
Subscribe for MWI buttons to save your changes and to subscribe / unsubscribe to the MWI
server.
To save the changes so they are available after a power fail, refer to Section
4.
161.
Version 4.6

Figure 5-8: Supplementary Services Parameters Screen

71
5. Configuring the MediaPack
8.1 on page 169.
Table 5-6.
5.9 on page
June 2005