Srtp Parameters - AudioCodes Mediant 600 User Manual

Parameter
[HTTPSRequireClientCertificate] Requires client certificates for HTTPS connection. The client
[HTTPSRootFileName]
[HTTPSPkeyFileName]
[HTTPSCertFileName]

13.4.3 SRTP Parameters

The Secure Real-Time Transport Protocol (SRTP) parameters are described in the table
below.
Parameter
Web: Media Security
EMS: Enable Media Security
[EnableMediaSecurity]
SIP User's Manual
certificate must be preloaded to the device and its matching
private key must be installed on the managing PC. Time and
date must be correctly set on the device for the client certificate
to be verified.

[0] = Client certificates are not required (default).

[1] = Client certificates are required.
Notes:

For this parameter to take effect, a device reset is required.

For a description on implementing client certificates, see
''Client Certificates'' on page 64.
Defines the name of the HTTPS trusted root certificate file to be
loaded using TFTP. The file must be in base64-encoded PEM
(Privacy Enhanced Mail) format.
The valid range is a 47-character string.
Note: This parameter is only applicable when the device is
loaded using BootP/TFTP. For information on loading this file
using the Web interface, refer to the Product Reference Manual.
Defines the name of a private key file (in unencrypted PEM
format) to be loaded from the TFTP server.
Defines the name of the HTTPS server certificate file to be
loaded using TFTP. The file must be in base64-encoded PEM
format.
The valid range is a 47-character string.
Note: This parameter is only applicable when the device is
loaded using BootP/TFTP. For information on loading this file
using the Web interface, refer to the Product Reference Manual.
Table 13-20: SRTP Parameters
Enables Secure Real-Time Transport Protocol (SRTP).

[0] Disable = SRTP is disabled (default).

[1] Enable = SRTP is enabled.
Note: For this parameter to take effect, a device reset is required.
526
Mediant 600 & Mediant 1000
Description
Description
Document #: LTRT-83308