Quick Setup For The Mediant 2000; Figure 1-1: Required Steps To Install The Mediant 2000 - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide
1

Quick Setup for the Mediant 2000

This guide provides information on how to install the Mediant 2000 for the first time. Prior
knowledge of IP networks is required.
Refer to the configuration procedures, outlined in
initialize and configure the device. For detailed information on how to fully configure the gateway,
refer to the Mediant 2000 User's Manual.
1
2
3
4
Provision
5 MGCP/MEGACO
Parameters
6
7
Version 4.4

Figure 1-1: Required Steps to Install the Mediant 2000

Unpack the Mediant 2000
Mount the Mediant 2000
Connect the cables on the
Mediant 2000
Initialize the Mediant 2000
Provision
H.323
Parameters
Configure the PSTN
Parameters
Change the Mediant 2000
password
1. Quick Setup for the Mediant 2000
Figure 1-1, for information on how to install,
Provision
SIP Parameters
5
Refer to Section 2.1
Refer to Section 2.2
Refer to Section 2.3
Refer to Section 3
Refer to Section 3.5
Refer to Section 4
August 2004