Maintenance Schedule - Stratasys F170 User Manual

MAINTENANCE SCHEDULE

Warning: Always wear proper heat protective clothing when working inside the
oven.
Maintenance tasks must be performed on a regular basis in order to maintain optimal system operation.
1 outlines the general maintenance schedule for the F123 Series. Detailed instructions for each task make up
the rest of this chapter.
Table 7-2 lists part numbers for various replacement consumable items. Use the part numbers listed in this table
when ordering replacement parts from Stratasys or your regional Stratasys office.
Table 7-1: Maintenance Schedule
Weekly Monthly
X
X
X
Table 7-2: Replacement Consumables
Part Number
123-00300
123-00300
123-00307
123-00301
123-00302
123-00303
123-00304
123-00305
123-00306
As Needed Maintenance Task
"Cleaning the Oven Chamber" on page 164
"Cleaning the Platen" on page 164
"Clean/Inspect Tip Wipe Assemblies" on page 165
X
"Cleaning the Exterior Surface of the Printer" on page 167
X
"Cleaning the Touchscreen Display" on page 167
Description
Model Head (standard)
Support Head (standard)
PLA Model Head
PLA Cooling Module
F170 substrate 1 box of 16
F270 substrate 1 box of 16
F370 substrate 1 box of 16
Tip shield kit - 4 sets
2-pack of tip wipe assemblies (see
).
page 165
"Clean/Inspect Tip Wipe Assemblies" on
163
Table 7-