Stratasys F170 User Manual page 99

The Tip Calibration page contains an option for performing an Automatic Tip Calibration as well as a Manual Tip
Calibration. Pressing the Start button associated with either of these options will allow you to perform that
particular calibration procedure. Each calibration procedure is delivered in the form of a wizard which will guide
you through the process of performing the calibration procedure. See
and "Manual Tip Calibration" on page 144
Figure 4-61:
TOUCHSCREEN CALIBRATION
Pressing anywhere within the Touchscreen Calibration row will open a dialog allowing you to recalibrate the
touchscreen display. See
Figure 4-62:
for detailed instructions.
Tip Calibration Options
"Touchscreen Calibration" on page 154
Touchscreen Calibration
"Automatic Tip Calibration" on page 142
for detailed instructions.
90