Calibration - Stratasys F170 User Manual

CALIBRATION

Note: This section provides an overview of the Calibration page and its features,
but does not go into detail regarding calibration procedures. See
and Adjustments" on page 140
and instructions.
The Calibration page allows you to perform a variety of calibration procedures on the printer, including:
• Tip Calibration
Touchscreen Calibration
•
To access the Calibration page, press the Calibration button within the Tools page; a screen similar to the
following will be displayed.
Figure 4-59:
TIP CALIBRATION
The printer's calibration status will be displayed within the Tip Calibration row. Calibrated or Not Calibrated will
be displayed depending on the printer's Calibration status.
Pressing anywhere within the Tip Calibration row will open a page allowing you to select from a variety of tip
calibration options.
Figure 4-60:
Calibration Page
Tip Calibration
for detailed calibration procedure information
89
"6 Calibration