Maintaining The Printer; Routine Maintenance Schedule - Stratasys J850 User Manual

Stratasys J850/J835 User Guide

Maintaining the Printer

Performing routine maintenance tasks is essential for getting satisfactory
results from your printer. Perform the tasks at specified intervals.

Routine Maintenance Schedule

Frequency
Before printing
Before / after printing
Before / after printing
Weekly
Weekly
Weekly
Weekly
Weekly
Every 300 hours of printing (A
reminder message appears.)
Every 300 hours of printing (A
reminder message appears.)
DOC-18001 Rev. N
Task
Clean the UV lamp lenses.
Check the UV lamp overheating indicator.
Routine cleaning of:
• print heads
• UV lamp glass lenses
• roller surface
• wiper
• build tray and surrounding area
Clean the purge unit waste collector.
Perform the Pattern test.
Back up the printer's configuration files.
Restart the printer computer.
Clean the roller waste collector.
Calibrate the UV intensity.
Optimize the print heads.
4 Operating and Maintaining the Printer
For More
Information
"Cleaning the Print
Heads, UV Lamp
Glass, Roller and
Wiper" on page 4-
49.
See "UV Lamp
Check " on page 4-
45.
"Cleaning the Print
Heads, UV Lamp
Glass, Roller and
Wiper" on page 4-
49.
See step 11 of
"Cleaning the Print
Heads, UV Lamp
Glass, Roller and
Wiper".
See "Pattern Test"
on page 4-45.
See "Backing up the
Printer
Configuration" on
page 4-48
See "Cleaning the
Roller Waste
Collector and
Inspecting the
Roller Scraper" on
page 4-54.
See "Testing and
Calibrating the
UV Lamps" on
page 4-86.
See "Optimizing
(Calibrating) Print
Heads" on page 4-
68.
4-42