Stratasys F170 User Manual page 93

STANDBY MODE
The Standby Mode setting gives you the ability to put the printer into an energy saving state after the completion
of a build. When the Energy Saver radio button is selected (i.e. Standby Mode is turned On) the printer's oven
will automatically shut off 2 hours after the completion of a build, thus saving energy. When the Quick Start radio
button is selected (i.e. Standby Mode is turned Off) the printer's oven will remain On for 60 hours after the
completion of a build and oven temperature will stay at the material's build temperature.
Figure 4-47:
To configure this setting, press anywhere within the row; the Standby Mode page will be displayed. Use the
radio buttons within the page to select between the Energy Saver and Quick Start options as needed. The Quick
Start radio button is selected by default (i.e. Standby Mode is set to Off by default).
Figure 4-48:
LANGUAGE
The Language row displays the language that the User Interface is configured for. Language options include
English (default), Spanish, French, German, Italian, Russian, Chinese (traditional or simplified), and Japanese.
Figure 4-49:
To configure this setting, press anywhere within the row; the Language page will be displayed. Use the scrollbar
(along the right side of the page) to view the list of available languages. Select the radio button corresponding to
your desired language.
Standby Mode
Configure Standby Mode
Language
84