5.
Disconnect the door latch assembly solenoid cable connector.
6.
Disconnect the door latch assembly sensor cable connectors (2).
7.
Using a 4 mm socket wrench, remove the door latch assembly mounting nuts (2). See
39.
8.
Remove the door latch assembly from the oven door. See
Figure 7-39:
Door latch assembly mounting nut locations
9.
Using a 2.5 mm hex wrench, remove the sensor bracket mounting screws (2). See
10.
Remove the sensor and bracket from the latch assembly and retain them for re-installation. See
Figure
7-40.
Figure 7-40:
Door latch sensor mounting bracket detail
Figure
7-39.
198
Figure 7-
Figure
7-40.