Stratasys F170 User Manual page 65

JOB QUEUE CONTROLS
After opening the Edit Queue page three Job Queue Control buttons will be displayed within each row of the Job
Queue list (one set of buttons per entry in the list). These buttons will allow you to rearrange the jobs in the Job
Queue as needed. These buttons have the following functionality:
Table 4-5: Job Queue Control Buttons
Name
Move Up
Move Down
Delete
Button States
Selectable
Disabled
Selectable
Disabled
Selectable
Description
When selectable, moves the selected job up one
position in the job Queue list.
To move a job to the top of the Job Queue list, press
this button repeatedly until the job appears at the top
of the list.
There is not an option to move a job directly to the
top of the list.
When selectable, moves the selected job down one
position in the Job Queue list.
To move a job to the bottom of the Job Queue list,
press this button repeatedly until the file appears at
the bottom of the list.
There is not an option to move a job directly to the
bottom of the list.
Removes the selected job from the Job Queue list.
You will not be asked to confirm this action prior to
the job being deleted from the Job Queue.
56