Stratasys F170 User Manual page 95

SCREEN BRIGHTNESS
The Screen Brightness setting allows you to adjust the brightness of the touchscreen display.This setting is
displayed as a percentage with 100% percent representing the greatest amount of brightness available.
Figure 4-51:
To configure this setting, press anywhere within the row; the Screen Brightness page will be displayed. Within
this page use the slider graphic to adjust brightness as needed. Sliding to the right will increase brightness while
sliding to the left will dim brightness. Please note that you cannot set screen brightness to 0% (completely dim).
Figure 4-52:
UPnP
UPnP allows the printer to broadcast its Unique Device Name (UDN) address across the network. When this
setting is set to On, the printer will broadcast its UDN across the network allowing GrabCAD Print to
automatically detect the IP address of the printer for communication. When this setting is set to Off, the printer
will not broadcast its IP address across the network and GrabCAD Print will need to be manually configured to
communicate with the printer.
Figure 4-53:
Screen Brightness
Configure Screen Brightness
UPnP
86