Stratasys F170 User Manual page 109

WI-FI NETWORK CONFIGURATION
When the wireless network option is enabled you can scan for and connect to the printer via your local Wi-Fi
network (see Figure 4-78 on page
enter a password and/or username in order to connect to the network. Use the keypad to configure this
information; simply touch a field on the screen to select it and then use the keypad to enter network security
information. Touch anywhere on the screen outside of the keypad to exit and close the keypad. Press the
Connect button to save the network information configured. Once the Connect button has been pressed and
network information is saved, network information will not change.
Press the Back button to exit the page and return to the Network page; the The name of the selected wireless
network will be displayed within the Available Networks row.
Figure 4-81:
Press the Back button to exit the page and return to the Tools page. The Network button will refresh and a blue
indicator will be displayed indicating that the printer is configured for a Wi-Fi network.
Figure 4-82:
97). Depending on the network's security requirements you may need to
Wi-Fi Network Page
Enter Network Settings Dialog
100