Stratasys F170 User Manual page 154

A. Place a new substrate onto the platen and lock the substrate into its build position by lifting
up on the substrate ejection handle.
Caution: Always wear gloves when installing the substrate. Hand oils on the
substrate surface will result in poor part adhesion.
B. Navigate to Tools > Calibration > Tip Calibration. Press the Start button for the Manual
Tip Calibration option (see
C. The Print Calibration Part page will be displayed (as shown in
automatically select the calibration part. Press the Start button.
Figure 6-8: Print Calibration Part Page
Figure 6-3 for button location).
145
Figure 6-8) and the printer will