Software Version - Stratasys F170 User Manual
F123 series shared office 3d printers
Hide thumbs
Also See for F170:
- Operation and maintenance manual (91 pages) ,
- Site preparation manual (22 pages)
Table of Contents
Advertisement
SOFTWARE VERSION
Version information for the software used to control the printer (Controller Software) can be accessed via the
Maintenance page:
Note: Controller Software is installed on a flash device located on the Controller
board and should not be confused with GrabCAD Print software, which is
installed on the workstation PC.
1.
To access the Maintenance page, press the Maintenance button within the Tools page (see
"Working with the Tools Page" on page
2.
Locate the Update Software row within the page (see
3.
The printer's Controller Software version information is displayed within the Update Software
row.
Figure 5-29:
Controller Software Version Information
76).
"Maintenance" on page
139
91).
Advertisement
Table of Contents
