Stratasys F170 User Manual page 24

• If the Static option is enabled, you must manually configure the IP Address, Subnet Mask, and
Gateway Address fields.To configure this information simply touch a field on the screen to select
it and then use the keypad displayed to enter address information.
Touch anywhere on the screen outside of the keypad to exit and close the keypad.
•
Figure 2-9: Static Network Configuration
• Scroll to the bottom of the page and press the Apply button when finished to save the
network configuration.
Press the Back button in the upper-left corner of the page to return to the Network page.
•
Figure 2-10: Apply Changes Button
15