Stratasys F170 User Manual page 205

6. Carefully remove the camera from the mounting bracket. Retain the mounting bracket.
See Figure 7-37.
Figure 7-37:
Installing the Oven Door Camera
Note: Do not touch the camera lens. If necessary, wipe the camera lens with a
clean microfiber cloth.
1. Install the camera to the mounting bracket. See
2. Connect the camera cable to the connector on the back of the camera.
3. Using a 3mm hex wrench, install the mounting screw through the hole in the top of the oven door
to secure the camera assembly. See
Camera Detail
Figure 7-37.
Figure 7-36.
196