Basic operation of settings change
Change of setting value
Touch the select button (setting point) on the screen.
According to the setting item, the button requires selecting setting value, inputting value or displaying
other setting screen.
Key : It is a key for inputting the numerical value. It displays the keyboard on the bottom
In the above mentioned screen example, there is no setting item which displays the keyboard. For the
operation of keyboard refer to the next page.
confirms the numerical input.
When the setting range exists it repeats the numerical without displaying keyboard.
Key: It shifts to the setting screen of each setting item when touched.
(Displays the another setting screen.)
Setting contents are reflected if
: It is a key for selecting the setting value. Repeats with each touch
of the screen when touched.
4800bps 9600bps 19200bps
button is touched.
8.3 Utility Display
8.3.3 Basic operation of settings change