Data Transfer (Pc To Got); Connection From Pc To Got - Mitsubishi Electric Got 1000 Training Manual

4.3 Data transfer (PC to GOT)

4.3.1

Connection from PC to GOT

Notebook PC
This section explains procedures for writing data created on GT Designer2 to the
GOT.
Connect the PC and GOT.
To USB
connector
Remarks
To connect the personal computer and GOT, RS-232 or Ethernet can be used in
addition to the USB cable. Use of the USB cable enables the data to be transferred
at higher speed and reduces the operation time as compared with RS-232
communication. *1
*1 Download reference value: (GT15)
Connection method
Project
Data size
1MB
*2 When using the RS-232 cable, use the GT01-C30R2-9S.
Notebook PC
connector
USB
(12Mbps)
20 sec
To USB
4 - 17
GOT
To USB
connector
RS-232
(115Kbps)
2 min
30 sec
To USB
connector
GOT