Appendix
Appendix 1 Alarm history display function
Appendix 1.1 About the alarm
This is the function to display the user-created comment, and an error of GOT, PLC,
and network as an alarm message.
This chapter explains the functions that display following alarms.
(1) Alarm types
The GOT can detect the alarms as shown below.
(a) Displaying the user-created comment as an alarm message
The function that displays the user-created comments as alarm messages
when an alarm occurs.
(user alarm, advanced user alarm, alarm history display)
Suitable for the case in which the alarm, which is created by the user, needs
to be displayed.
M100: OFF
M101: OFF
(b) Displaying an error of GOT, PLC, or network as an alarm
It is possible to display the error code and error message when an error
occurs on the GOT, PLC or, network. (system alarm, advanced system
alarm)
This is used to display an error of GOT, PLC, or network.
ON
ON
M100 Check oil pressure.
M101
Error
occurance
Appendix 1
Check temperature.
Detail
400 Unable to communicate with CPU 16:40:30
9
AC down error
803 Transient error
M100 Temp. error
Check the
M101 Fuse error
temperature of
Line 1.
Detail