WEC8050 / WEC8500 Operation Manual
Scan trigger level
Scanning time for one channel
Service time during scanning
Scanning interval time
Number of probe requests
Number of scanning channels
Value of station roam delta
WEC8500#
Configuring IPSec Service of AP Group with CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create an AP group or enter the AP group configuration mode.
ap-group[AP_GROUP_NAME]
3) Enter the IPSec configuration mode for the AP group.
ip-sec
4) Configure the IPSec function for the AP group.
overwrite-ip-sec
enable
primary-ip
right-subnet
right-subnet-mask
auth-mode
ike-version
ike-lifetime
ipsec-lifetime
© Samsung Electronics America
-70 dBm
5 ms
100 ms
1000 ms
2
4
15
Figure 82. AP Group SSL Configuration
Version 7.1
page 178 of 673