WEC8050 / WEC8500 Operation Manual
To check the configured channel and TX power information, go to <Monitor>
<Access Points> <Radio> <802.11b/g/n>.
[General]
Max. Allowed Stations on an AP: Define max allowed stationsfor each Radio.
CONTROLLED VOICE OPTIMIZATION: set voice optimization.
Multi-antenna Mode : set Dynamic/Static.
4.2.1.6
Advanced Configuration
In order to provide the same services to the APs allocated to each group, the APC allows
configuration of advanced settings for each AP group.
Configuring AP Group Profile with CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create an AP group or enter the AP group configuration mode.
ap-group [AP_GROUP_NAME]
3) Enter the profile configuration mode for the AP group.
profile
4) Configure the following AP group profiles:
overwrite-apc-ap-timer
no overwrite-apc-ap-timer
echo-interval
discovery-interval
report-interval
statistics-timer
retransmit-interval
echo-retransmit-interval
max-echo-retransmit
overwrite-telnet-ssh
no overwrite-telnet-ssh
telnet-enable
no telnet-enable
ssh-enable
© Samsung Electronics America
Version 7.1
page 171 of 673