Samsung WEC8500 Operation Manual page 406

WEC8050 / WEC8500 Operation Manual
8.3.3 Configuring Web Authentication
To provide the web authentication service, the security L3 item of the WLAN and the web
authentication of the captive portal must be configured.
Configuration using CLI
[WLAN Configuration]
To configure web authentication in the WLAN, execute the command as follows:
1) Go to configure  WLAN configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Go to configure  WLAN  security  layer 3 configuration mode of CLI.
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# layer3
WEC8500/configure/wlan 1/security/layer3#
3) Enable the WEB authentication (default: disabled).

web-policy authentication
WEC8500/configure/wlan 1/security/layer3# web-policy authentication
4) Configure the Pre-Authentication ACL.

pre-auth-acl [ACL]
Parameter
ACL
5) Configures Web Page Type

web-page-type [Page Type]
Parameter
Page Type
© Samsung Electronics America
ACL applied before authenticated
Web authentication method
- internal: Uses the internal authentication page.
- external: Uses the authentication page of an external web server.
- downloaded: Uses the authentication page downloaded from the
system.
- customized: Uses the authentication page created through
configuration.
Description
Description
Version 7.1
page 406 of 673