Samsung WEC8500 Operation Manual page 239

WEC8050 / WEC8500 Operation Manual
6) Configure the key management algorithm to PSK.
WEC8500/configure/wlan 1/security# keymgmt psk
7) Disable the 802.1x key management algorithm.
WEC8500/configure/wlan 1/security# no keymgmt ieee8021x
8) Disable the 802.1x authentication.
WEC8500/configure/wlan 1/security# no ieee8021x
9) After applying the changed configuration, exit the security configuration mode.
WEC8500/configure/wlan 1/security# apply
WEC8500/configure/wlan 1/security# exit
10) To check the configuration information, use the following command.
WEC8500/configure# show wlan security summary
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Security>  <L2> tab.
After selecting the L2 Security Type as WPA + WPA2 and AUTH KEY MGMT as PSK,
click the <Apply> button.
© Samsung Electronics America
Figure 122. WPA/WPA2 PSK configuration
Version 7.1
page 239 of 673