Samsung WEC8500 Operation Manual page 86

WEC8050 / WEC8500 Operation Manual
3.4.5.6 Configuration of Network Details
Configuration using CLI
1) Go to configure  ospf configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# router ospf
WEC8500/configure# router ospf ?
1 - 10
2) Network configuration
Configure the ADDRESS, NETMASK, and AREA ID of a user-defined network.
WEC8500/configure/router/ospf 2# network ?
A.B.C.D
A.B.C.D/M
WEC8500/configure/router/ospf 2# network 100.100.100.1 ?
A.B.C.D
WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0 ?
area
WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0 ?
area
WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0
area ?
0 - 4294967295
A.B.C.D
WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0
area 3 ?
<cr>
WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0
area 3
Parameter
NETWORK ADDRESS
NETMASK
AREA ID
© Samsung Electronics America
OSPF process ID
Network number
OSPF network prefix
OSPF wild card bits(network mask)
Set the OSPF area ID
Set the OSPF area ID
OSPF area ID as a decimal value
OSPF area ID in IP address format
Network number OSPF network prefix
OSPF wild card bits (network mask)
OSPF area ID as a decimal value/ OSPF area ID in IP address format
Description
Version 7.1
page 86 of 673