Samsung WEC8500 Operation Manual page 295

Wireless enterprise access point controllers (apc)
Hide thumbs Also See for WEC8500:
Table of Contents

Advertisement

WEC8050 / WEC8500 Operation Manual
AirMove Configuration Item
scan interleaving time
Service time in scanning period
scan report level
Numbers of handover scan
attempts per channel
Number of channels for which
scan is attempted
scan trigger level
station decision delta
An example of using the command for each configuration item is as follows:
WEC8500/configure# handover opmode APP
WEC8500/configure# handover buffered-forwarding enable
WEC8500/configure# handover decision-delta 10
WEC8500/configure# handover scan-time-channel 10
WEC8500/configure# handover scan-time-interleave 1000
WEC8500/configure# handover scan-time-service 200
WEC8500/configure# handover scan-report-level -90
WEC8500/configure# handover number-of-proreq 3
WEC8500/configure# handover number-of-channel 4
WEC8500/configure# handover scan-trigger-level -65
WEC8500/configure# handover station-decision-delta 10
To check the configuration information, use the 'show handover configuration' command.
© Samsung Electronics America
Configures the scanning interval of a wireless terminal.
- OPTION: scan-time-interleave
- OPTION_DETAIL: Time (ms)
Configures a period when an wireless terminal
transmits/receives an actual data traffic after scanning.
- OPTION: scan-time-service
- OPTION_DETAIL: Time (ms)
Configures the threshold of a scan report that will be
transmitted from an AP to the APC.
- OPTION: scan-report-level
- OPTION_DETAIL: scan report level (dBm)
Configures the scanning times of a wireless terminal per
channel.
- OPTION: number-of-proreq
- OPTION_DETAIL: Number of times
Configures the number of channels a wireless terminal will
scan at a time.
- OPTION: number-of-channel
- OPTION_DETAIL: Number of channels
RSSI intensity at which a wireless terminal starts channel scanning
- OPTION -trigger-level
- OPTION_DETAIL: RSSI (dBm)
Configures the threshold of RSSI difference, measured in a
wireless terminal, between a serving AP and a target AP. If the
threshold is exceeded, a wireless terminal performs its
handover.
- OPTION: station-decision-delta
- OPTION_DETAIL: Threshold (dBm)
Description
page 295 of 673
Version 7.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wec8050

Table of Contents