Samsung WEC8500 Operation Manual page 428

WEC8050 / WEC8500 Operation Manual
Parameter
PORT_NUMBER
5) Configure the items related to retransmissions in TACACS+ communications.
You can use default values without changing configuration.
WEC8500/configure/security/tacacs 1# retransmit-interval
[RETRY_INTERVAL]
WEC8500/configure/security/tacacs 1# retransmit-count [FO_RETRY_COUNT]
Parameter
RETRY_INTERVAL
FO_RETRY_COUNT
6) If necessary, configure the source IP address of the TACACS+ message.
WEC8500/configure/security/tacacs 1# source-ip [IP_ADDRESS]
Parameter
IP_ADDRESS
7) Configure whether to transfer packets to the TACACS+ server. You can use default
values without changing configuration.
WEC8500/configure/security/tacacs 1# status [STATUS]
Parameter
STATUS
8) Exit TACACS+ server configuration and then security configuration mode.
WEC8500/configure/security/tacacs 1# exit
WEC8500/configure/security# exit
© Samsung Electronics America
Description
Port number of the TACACS+ server
(range: 1-65,535, default value: 49)
Description
Retransmission interval for a TACACS+ message
(unit: seconds, range: 1-5, default value: 3)
Maximum message retransmission count before a TACACS+
server failover is attempted (range: 0-3, default value: 2)
Description
Source IP address of the TACACS+ message
Note: it must be one of the IP addresses configured in the
Wireless Enterprise wireless LAN system.
Description
Status indicating whether packets are transferred to the
TACACS+ server (default value: enable)
Version 7.1
page 428 of 673