Samsung WEC8500 Operation Manual page 411

WEC8050 / WEC8500 Operation Manual
8.3.5 Configuring Web Pass-through
The APC provides the web pass-through function to move to a specific address all the time
when the user uses the web.
Configuration using CLI
[WLAN Configuration]
To configure web pass-through in the WLAN, execute the command as follows:
1) Go to configure  WLAN configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Go to configure  WLAN  security  layer 3 configuration mode of CLI.
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# layer3
WEC8500/configure/wlan 1/security/layer3#
3) Enable the WEB authentication (default: disabled).

web-policy pass-through
WEC8500/configure/wlan 1/security/layer3# web-policy pass-through
4) Configure the Pre-Authentication ACL.

pre-auth-acl [ACL]
Parameter
ACL
5) Configure the Web Page Type.

web-page-type [Page Type]
Parameter
Page Type
© Samsung Electronics America
Description
ACL for occurrence of redirection
Web authentication method
- external: Uses the authentication page of an external web server.
- downloaded: Uses the authentication page downloaded from the
system.
Description
Version 7.1
page 411 of 673