Samsung WEC8500 Operation Manual page 317

WEC8050 / WEC8500 Operation Manual
6) DEL-AP: Delete AP members from the energy saving group.
WEC8500/configure/rrm/energy-saving-group 1# del-ap
Configuration using Web UI
From the menu bar of <WEC Main Window>, select <Configuration> and then select
<Radio>  <Advanced>  <Energy Saving Groups>  <GROUP NAME> in the
submenus.
7.4.7 Energy Saving Auto Classification
The purpose of the AP without the connected STA at a specific time when the STA
connected to the APC is drastically reduced is to reduce power consumption of the APC by
turning off the RF radio of the AP.
The APs of the APC are classified into an active group to keep them at the operational
status all the time and a standby group to make their RF radio off at the designated time.
When the APC designates a standby group (energy saving group), the others are recognized
as an active group.
© Samsung Electronics America
Version 7.1
page 317 of 673