Samsung WEC8500 Operation Manual page 217

WEC8050 / WEC8500 Operation Manual
4.2.8.5 Restarting and Upgrading AP
After downloading the AP package, APs in the remote group are restarted so that they can
run on the upgraded version.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group rUpgrade
WEC8500/configure/ap-group rUpgrade# remote
WEC8500/configure/ap-group rUpgrade/remote# reboot upgrade
CLI for checking configuration:
WEC8500# show remote-ap-group upgrade config rUpgrade
================== Remote Ap Group Upgrade Config =================
Group Name
Enable
Type
Mode
Path
PortNum
MAXretries
ForceOption
weafama
weafamb
WEC8500# show remote-ap-group upgrade list rUpgrade
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
AP_ID Model Version(config/current) Status(RC/FR/RC)
1 WEA303i
2 WEA312i
3 WEA303i
© Samsung Electronics America
: rUpgrade
: Enable
: Default
: FTP
: package/ap
: 21
: 3
: Disable
: ap_1 (APID:1, IP:10.10.10.160)
: weafama_1.7.0.U.bin (1.7.0.U)
: (APID:0, IP:0.0.0.0)
: ()
Remote/1.7.0.U
Remote/1.7.0.U
Remote/1.7.0.U
Success( 0/ 0/128) MasterApCfg
Success( 0/ 0/146) -
Success( 0/ 0/146) -
Version 7.1
MasterAp
page 217 of 673