Samsung WEC8500 Operation Manual page 369

WEC8050 / WEC8500 Operation Manual
Parameter
RETRY_INTERVAL
RETRY_COUNT
FO_RETRY_COUNT
7) Exit RADIUS server configuration and security configuration mode.
WEC8500/configure/security/radius 1# exit
WEC8500/configure/security# exit
8) To check the configuration information, use the 'show security radius-server summary'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <AAA>  <RADIUS> menu in the sub-menus.
If you click the <Add> button in the RADIUS initial window, you can add a RADIUS
server.
The server addition window is shown below.
Item
INDEX
TYPE
© Samsung Electronics America
Retransmission interval for a RADIUS message
(unit: seconds, range: 1-60, default value: 2)
Maximum retransmission count of a RADIUS message
(range: 1-20, default value: 10)
Maximum retransmission count of a RADIUS message before
a RADIUS server failover is attempted
Must smaller than the RETRY_COUNT value (range: 1-10,
default value: 3)
Figure 181. RADIUS server configuration
ID that distinguishes RADIUS server configurations
Selects the type of the RADIUS server
Description
Description
page 369 of 673
Version 7.1