WEC8050 / WEC8500 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <Access Control Lists> <IP ACL> menu in the sub-menus.
The initial window of ACL rule configuration is shown below. When you click the <Add>
or <Delete> button, you can add or delete ACL rule.
To change the configuration of ACL rule, click ACL NAME to change. You can change the
configuration using the <Add> or <Delete> button. In addition, if there is a time profile in
an ACL name, the IP ALC window is changed as shown below. After selecting a time
profile, click the <Apply> button to apply the time profile to the ACL.
3.5.1.2
ACL Rule Configuration
Configuration using CLI
1) Go to interface configuration mode where you will apply the configure ACL rule of
CLI.
APC# configure terminal
APC/configure# interface [name]
APC/configure/interface [name]#
2) Configure ACL to an interface.
ip access-group [MODE] [DIRECTION] [ACL_NAME]
Parameter
MODE
DIRECTION
© Samsung Electronics America
Figure 38. ACL Configuration Window
Figure 39. Window where a Time Profile is Applied to ACL
Configuration mode (fw/fqm)
Application direction configuration (in/out)
Description
page 116 of 673
Version 7.1