Samsung WEC8500 Operation Manual page 382

WEC8050 / WEC8500 Operation Manual
8.2.2.3 Manual configuration (Move)
A user can change the classification of an unauthorized AP that is detected by the WI or
that is classified according to the rule configured by a user.
Configuration using CLI
1) Go to configure  wi  device configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device#
By using the MAC of an unauthorized AP to change, execute the move command.

move [MAC] [FROM] [TO]
Parameter
MAC
FROM
TO
2) To check the changed configuration, use the following command.

show wi device ap list managed

show wi device ap list unmanaged
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Wireless Intrusion>  <AP> menu in the sub-menus. And when the AP list is
displayed, select one out of the AP list to go to the detail view screen. In the detail view
screen, operator can manually change the classification of an AP by using the top down
menu of MOVE CLASSIFICATION MANUALLY.
© Samsung Electronics America
Description
MAC address of a detected AP
Previous classification of a MAC
Classification to change
Version 7.1
page 382 of 673