WEC8050 / WEC8500 Operation Manual
7.6.3
Interference Type Configuration
The interference type of 2.4 GHz or 5 GHz that can be detected by the Wireless Enterprise
wireless LAN is shown below.
Wireless bandwidth
2.4 GHz
5 GHz
To configure an interference type, execute the command as follows:
1) Go to the configure mode of the CLI.
APC# configure terminal
APC/configure#
2) Configure an interference type. The default value of all the interference types is
'enabled'.
interferer 80211b zigbee: 2.4 GHz configuration
interferer 80211a cordless_phone: 5 GHz configuration
© Samsung Electronics America
continuous_transmitter, cordless_phone, video_camera
bluetooth, continuous_transmitter, cordless_phone, microwave_oven,
video_camera, zigbee
Interference type
Version 7.1
page 327 of 673