Samsung WEC8500 Operation Manual page 387

WEC8050 / WEC8500 Operation Manual
The description of OPTION parameter is as follows:
Parameter
ap-blacklist-check
managed_ssid_invalid_security
fakeap-beacon-on-invalid-channel
fakeap-beacon-without-ssid
fakeap-managed-ssid
illegal-channel
managedap-invalid-ssid
unknownap-managed-ssid-
withauth-client
3) To check the changed configuration, use the following command.

show wi device ap current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Policy>  <Static Rule> menu in the sub-menus. And then,
operator can change the setting by selecting <AP> at the upper tab and clicking Apply.
In the configuration screen, operator can check Option and click Apply for configuration.
© Samsung Electronics America
Description
Allocates Rogue ID = 101 by checking a rogue included in the
black list.
Allocates Rogue ID = 102 for an AP that uses a managed
SSID and its managed client is in the association status.
Allocates rogue ID = 103 for an AP whose UIC is invalid and
that uses a SSID that is not in the ssid white list among the
APs that use a managed MAC.
Allocates Rogue ID = 104 for an AP whose UIC is invalid and
its SSID is hidden among the APs that use a managed MAC.
Allocates Rogue ID = 105 for an AP whose UIC is invalid and
its channel is not in the channel validation list among the APs
that use a managed MAC.
Allocates Rogue ID = 106 if an AP uses a channel that is not
in the channel validation list among detected APs.
Allocates Rogue ID = 107 for an AP that uses a SSID that is
not in the ssid-whitelist among the APs that use a managed
MAC and its UIC is valid.
Allocates Rogue ID = 108 by checking the association status
between an unauthorized AP and a managed client.
Version 7.1
page 387 of 673