Samsung WEC8500 Operation Manual page 490

WEC8050 / WEC8500 Operation Manual
10.8 Upgrade
The APC provides the upgrade function and version checking function that applies a new
version of package when it is distributed.
10.8.1 Checking Package Version
You can check the version of a current system by using the following command.

show version
The following shows the execution results of the command:
WEC8500# show version
Samsung package version information
Primary (currently running)
ver
buildTime
builder
buildDir
Backup
ver
buildTime
builder
buildDir
Boot rom version information
ver
10.8.2 System Upgrade
The APC does system upgrade using CLI and Web UI.
Configuration using CLI
Apply a new package to the system by using the following command.
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Perform upgrade by using a package.

package upgrade [FILE_NAME]
Parameter
FILE_NAME
© Samsung Electronics America
: 1.4.4.R
: Fri Sep 6 06:08:35 2013
: apcbuild
: /home2/apcbuild/release/wec8500_1.4.4
: 1.4.4.R
: Fri Sep 6 06:08:35 2013
: apcbuild
: /home2/apcbuild/release/wec8500_1.4.4
: GC15
Package file to upgrade
The package must be located in the /user/package directory.
Description
Version 7.1
page 490 of 673