Samsung WEC8500 Operation Manual page 219

WEC8050 / WEC8500 Operation Manual
CHAPTER 5.
This chapter describes how to create and configure WLAN that is the most fundamental
basis for Wireless Enterprise wireless LAN service.
5.1 WLAN Configuration
5.1.1 Basic WLAN Configuration
The WLAN profile helps configure and manage the WLAN connection service of an AP in
the APC. To use WLAN service, it is necessary to basically configure AP group and
interface group and specify Service Set Identifier (SSID).
Configuration using CLI
Go to the wlan configuration mode from the configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan [WLAN ID]
Parameter
WLAN_ID
The WLAN configuration procedures are as follows:
1) Go to configure  wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1#
2) Add WLAN to an AP group.
Configure an AP group to which WLAN service will be provided. The AP group
configuration is only possible in the AP group configuration mode instead of the wlan
configuration mode. The below configuration allocates wlan 1 to the apg_01 AP
group.
© Samsung Electronics America
WLAN Management
Description
WLAN ID (range: 1-255)
Version 7.1
page 219 of 673