Samsung WEC8500 Operation Manual page 513

WEC8050 / WEC8500 Operation Manual
When the operator configures an encoding method, the APC system automatically converts
the encoding method of the file and allows the exported file to the WEC to be properly
displayed in the PC. In addition, if the file stored in the PC is imported to the system
through the WEC, it is properly processed in the system.
To configure an encoding method, it is possible to select <Administration> in the menu
bar of <WEC Main window> and then configure in <File Management>  <Character
Encoding> in the sub-menus.
© Samsung Electronics America
Version 7.1
page 513 of 673