Samsung WEC8500 Operation Manual page 384

WEC8050 / WEC8500 Operation Manual
8.2.2.4 Manual configuration (Remove)
A user can manually change the status of an unauthorized AP to 'Removed', that is
detected by the WIDS or that is classified according to the rule configured by a user.
Configuration using CLI
1) Go to configure  wi  device configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device#
2) By using the MAC of an unauthorized AP to change, execute the remove command.

remove [MAC]
Parameter
3) To check the changed configuration, use the following command.

show wi device ap list removed
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Wireless Intrusion>  <AP> menu in the sub-menus. And when the AP list is
displayed, check a desired MAC in the list and click the <Remove> button to manually
remove an AP.
In addition, after going into the detail view screen by selecting one out of the AP list,
operator can also remove an AP by changing the REMOVE MANUALLY option to On.
1) In the AP list screen, operator can change the status of several APs to 'Removed' by
clicking <Remove> button.
© Samsung Electronics America
MAC
Description
MAC address of an unauthorized AP
Version 7.1
page 384 of 673