Samsung WEC8500 Operation Manual page 246

WEC8050 / WEC8500 Operation Manual
5.3.5 Dynamic WEP Configuration
The Dynamic WEP is a security algorithm that improves the security vulnerabilities of a
static WEP by using 802.1x authentication. Unlike the static WEP that is based on a
configured fixed key, it creates a cryptographic key by executing 802.1x authentication
when a terminal is connected.
Configuration using CLI
For dynamic WEP configuration, execute the command as follows:
1) Go to configure  wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Go to security configuration mode and initialize the configuration.
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# setDefault
3) Enable the 802.1x authentication.
WEC8500/configure/wlan 1/security# ieee8021x
4) To configure the length of a cryptographic key of dynamic WEP, execute the following
command.
WEC8500/configure/wlan 1/security# ieee8021x encryption [KEY_LENGTH]
Parameter
KEY_LENGTH
5) After enabling the RADIUS server function for authentication, specify the index of
authentication RADIUS server. The RADIUS server information must be configured
in advance.
WEC8500/configure/wlan 1/security# radius-server auth-servers
[RADIUS_SERVER_ID_LIST]
© Samsung Electronics America
Description
Key length (Bit unit)
- 40
- 104
Version 7.1
page 246 of 673