WEC8050 / WEC8500 Operation Manual
3) Designate remote AP group properties to the AP group.
group-type remote
4) When the remote AP group is deleted, use the 'no' parameter in front of the ap-group
command to delete the remote AP group.
no ap-group[REMOTE_AP_GROUP_NAME]
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. Click the <Add> or <Delete> button to add or
delete a group.
4.2.2.2
Local Authentication Configuration for Remote AP Group
Users (stations) accessing the remote AP and the Radius server which authenticates such
users can be configured.
Configuration using CLI
To configure the local authentication of the remote AP group, perform the command as
follows:
1) Go to configure Remote AP Group configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
WEC8500/configure/ap-group {remote-ap-group-name}
WEC8500/configure/ap-group/{remote-ap-group-name}#remote
2) Configure Primary Radius Server 1, Primary Radius Server 2, and Primary Radius
Server 3. The RADIUS server information must be created in the radius of the security
item in advance. To delete the configured RADIUS server information, enter 'no'
parameter in front of the command.
remote primary-radius[RADIUS_SERVER_INDEX]
no remote primary-radius[RADIUS_SERVER_INDEX]
remote secondary-radius[RADIUS_SERVER_INDEX]
© Samsung Electronics America
Figure 84. Remote AP Group Add/Remove Window
Version 7.1
page 182 of 673