Samsung WEC8500 Operation Manual page 75

WEC8050 / WEC8500 Operation Manual
exit
host
max-concurrent-dd
concurrently
maximum-area
neighbor
network
ospf
overflow
passive-interface
redistribute
routing protocol
router-id
summary-address
timers
3) Router ID configuration
Enter an IP address to use.
WEC8500/configure/router/ospf 2# router-id ?
A.B.C.D
WEC8500/configure/router/ospf 2# router-id 10.10.0.1 ?
<cr>
Parameter
OSPF router-id in IP address
4) AUTO COST configuration
Enter an OSPF cost value (1-4294967) to use.
WEC8500/configure/router/ospf 2# auto-cost ?
reference-bandwidth
OSPF cost
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth ?
1 - 4294967
Mbits per second
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200 ?
<cr>
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200
Parameter
reference-bandwidth
© Samsung Electronics America
Exit from router mode
OSPF stub host entry
Maximum number allowed to process DD
Maximum number of ospf area
Specify a neighbor router
Enable routing on an IP network
OSPF specific commands
Control overflow
Suppress routing updates on an interface
Redistribute information from another
Router-id for the OSPF process
Configure IP address summaries
Adjust routing timers
OSPF router-id in IP address format
Description
Enter an IP address.
Use reference bandwidth method to assign
The reference bandwidth in terms of
Description
Enter a value from 1-4294967.
Version 7.1
page 75 of 673