Samsung WEC8500 Operation Manual page 333

WEC8050 / WEC8500 Operation Manual
ENABLE
OWN-APC-INDEX
========================================================
[Adding APC to APC List]
To add an APC to the cluster, the APC must be added to the APC list first. APC information
is automatically added to the APC list.
1) Go to apc-list configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure# apc apc-list
WEC8500/configure/apc/apc-list#
2) Add the APC to the APC list.

add-apc [APC_NAME] [MAC_ADDRESS]
Parameter
APC_NAME
MAC_ADDRESS
[Adding APC to cluster]
After adding APC to the APC list, the APC must be added to a cluster.
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Add the APC to a cluster.

cluster add-apc [INDEX] [APC_NAME] [IPV4_ADDRESS] [DB_REFRESH_
INTERVAL]
Parameter
INDEX
APC_NAME
IPV4_ADDRESS
DB_REFRESH_INTERVAL
© Samsung Electronics America
: YES
: 1
APC name to be added to the APC list
MAC address of the APC to be added to the APC list
(system mac address output parameter value of the 'show
system info' command in the APC)
Index in cluster (range: 1-12)
APC name (maximum 18 characters)
IPv4 address
Database update interval (Unit: s, range: 60-5000, default: 120)
Description
Description
page 333 of 673
Version 7.1