Samsung WEC8500 Operation Manual page 281

WEC8050 / WEC8500 Operation Manual
4) Select one out of None/802.1p/DSCP in the PROTOCOL drop-down list.
5) Enter 802.1p or a DSCP value into the QoS Default Values.
6) Click the <Apply> button to apply.
6.2.2.2 Wireless Section
The system can provide QoS service in a wireless section for each AP downward packet
type (voice, video, best effort, background). You can configure 802.1p and DSCP tag which
are the criteria used to select access category.
Configuration using CLI
1) Go to configure  QoS mode of a wireless section of CLI.
APC# configure terminal
APC/configure# [80211a/80211bg] qos
APC/configure/80211a/qos#
2) Configure 802.1p or DSCP tag value to use for a packet type.

ap-tags [PACKET_TYPE] [802.1P TAG] [DSCP TAG]
Parameter
PACKET_TYPE
802.1P_TAG
DSCP_TAG
3) To check the QoS parameter information of a configured AP, use the 'show 80211a
[80211bg] qos ac-profile [PACKET_TYPE]' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <QoS> menu in the sub-menus.
© Samsung Electronics America
Packet type configuration (voice/video/best_effort/background)
802.1p configuration
DSCP tag configuration
Figure 147. QoS configuration of AP (wireless section)
Description
page 281 of 673
Version 7.1