Samsung WEC8500 Operation Manual page 225

WEC8050 / WEC8500 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Advanced> tab.

ACL RULE: Configures the WLAN-based ACL function.

STATIC ADDRESS DISALLOWED

DHCP OVERRIDE

DHCP SERVER: Enter a DHCP server IP address.

WMM: Configures the WiFi Multimedia (WMM) mode.

DTIM: Enter a Delivery Traffic Indication Message (DTIM) value (1-255).

STATION IDLE TIMEOUT: Enter a station idle timeout value. The value range is 30-
3600 and it must be the multiple of 15.

VOIP FAILURE DETECT: Configures call failure detection.
5.1.4 Managing Root Service
To provide a wireless LAN service where cable installation is difficult, a Wireless
Enterprise AP can be configured as a repeater mode to relay wireless LAN traffics. To
configure this kind of network, the Repeater AP and Root AP are required. The Repeater
AP is working as a wireless terminal and the Root AP connects a Repeater AP to a wireless
terminal for connection to the APC.
The root AP must be enabled with the repeater service to allow repeater AP connections.
© Samsung Electronics America
Figure 113. WLAN-based ACL configuration
Version 7.1
page 225 of 673