Samsung WEC8500 Operation Manual page 440

WEC8050 / WEC8500 Operation Manual
8.7.4 Configuration Synchronization (Remote AP Group)
The Wireless Enterprise WLAN system provides a function of synchronizing the
configuration of the AP of the remote group and ACL if the AP of the remote group
operates as a local bridge.
8.7.4.1 Requesting Synchronization
If the remote AP operates with the local switching mode, the configuration of the ACL
between APC and AP must be synchronized. If AP and CAPWAP run, the configuration of
the ACL is automatically synchronized, but if the operator changes the ACL of the APC,
the synchronization of ACL configuration must be performed as follows:
Configuration using CLI
The synchronization of the AP of the remote group uses the following CLI:
WEC8500# configure terminal
WEC8500/configure# rbac
WEC8500/configure/rbac# sync-config ?
acl-profile
all
ap
remote-ap-group

all: Perform synchronization for all APs of the remote group.

remote-ap-group [group-name]: Performs synchronization only for the APs included in
the corresponding remote group.

acl-profile [profile-name]: Performs synchronization only for the APs included in the
remote group which uses the corresponding ACL profile (CLI only).

ap [ap-profile-name]: Performs synchronization only for a specific AP (CLI only).
Synchronization can be confirmed as follows:
WEC8500# show rbac remote-group summary
GRP_ID
======
2
etc/rmtapgrp/rbac_cfg_20140305094752849046.tar
© Samsung Electronics America
GRP_NAME PRO_ID
==================
rmt_grp_01
Sync-config Acl profile
Sync-config All
Sync-config Remote Ap Group
Sync-config Remote Ap Group
Role Config File Name
====== ==========================
1
Version 7.1
page 440 of 673