Samsung WEC8500 Operation Manual page 370

WEC8050 / WEC8500 Operation Manual
Item
IP ADDRESS
SHARED SECRET FORMAT
SHARED SECRET
CONFIRM SHARED SECRET
AUTH PORT NUMBER
ACCT PORT NUMBER
RETRANSMIT INTERVAL
TOTAL RETRANSMIT COUNT
RETRANSMIT COUNT
FAILOVER
8.1.1.2 Configuring MAC Authentication
The MAC authentication of a RADIUS server is configured as follows:
Configuration using CLI
1) Go to configure  security  radius configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
WEC8500/configure/wlan 1/security# radius 1
WEC8500/configure/security/radius 1#
2) Set the password type that will be used for the MAC authentication of the device.
WEC8500/configure/security/radius 1# mac-auth-pw-type [PW_TYPE]
© Samsung Electronics America
- Auth: Performs authentication
- Acct: Performs accounting
- Auth/Acct: Performs authentication and accounting
IP address of the RADIUS server
Key input format for communications with the RADIUS server
- ASCII: ASCII strings
- HEX: Hexadecimal values
Key for RADIUS server communications
Re-enters the key for RADIUS server communications for
confirmation
Number of the communication port for RADIUS server
authentication
(range: 1-65,535, default value: 1,812)
Number of the communication port for RADIUS server
accounting
(range: 1-65,535, default value: 1,813)
Retransmission interval for a RADIUS message
(range: 1-60, default value: 2, unit: seconds)
Maximum retransmission count of a RADIUS message
(range: 1-20, default value: 10)
Maximum retransmission count of a RADIUS message before
a RADIUS server failover is attempted
(range: 1-10, default value: 3, must be smaller than the TOTAL
RETRANSMIT value)
Description
page 370 of 673
Version 7.1