Samsung WEC8500 Operation Manual page 485

WEC8050 / WEC8500 Operation Manual
10.6.2 Managing Old License Key
An old license key can differ in regard to the number of manageable APs, whether to
support the VQM function, whether to support the firewall function, and the period of use
of a function.
A license key is unique for each system and it consists of encrypted 53 characters.
A license key is distributed in a file or text format.
Installation
APC system can install/register only one official license key and one temporary
license key. A license key (temporary license Key) with time duration can be
installed only 3 times.
Use period
An official license key has no restriction on use period.
A temporary license key has a restriction on use period and the period can be 1,
30, or 60-day.
Apply
A license key becomes active only after system rebooting after the key is installed
or deleted.
Configuration using CLI
To configure a license key related function, go to license mode by executing the following
command.
WEC8500# configure terminal
WEC8500/configure# system license
WEC8500/configure/system/license#
[Installing License Key]
When the system is shipped out, basically there is no registered license key. Therefore, you
must install the license key you received right after the first system installation. You can
install a license key directly or remotely using CLI.

install-key: Registers a file. If a license key file exists in a specified folder, use the
license key file for registration. Once it is installed, the license key file is deleted from
the system.

install-key [LICENSE_KEY]: Direct registration

install-key [IP_ADDRESS] [PORT_NUMBER] [ID] [PASSWORD] [PATH]: Remote
registration
© Samsung Electronics America
Version 7.1
page 485 of 673